Manufacturer: FMA
Material: Fireproof ABS+EPS foam inner pad
Weight: 740g
Color: Black/gray/red/yellow/blue/orange/white
Content: Helmet + wool Velcro sticker (set)+ reflective sticker (set)+ inner pad cotton
(one set of each thickness)
Size: Recommended head circumference within 61CM
FMA SAR series helmet shell by fireproof ABS material, fireproof abs, strong liquidity
resistance, high processing, high strength, quality assurance, good product quality,
good service, welcome to call consultation, quality assurance, high impact strength,
chemical resistance, flame retardant material environmental protection. The inner
"eps" is polystyrene foam. This substance is based on polystyrene resin as raw material,
in the process of making the foaming agent as an auxiliary reagent, and then heated
at high temperature to form the plastic foam, this foam is a more unique rigid closed
-cell structure. Its chemical structure is relatively stable and it is a durable property."
The inner layer is the same as the common skateboard helmet with a 2cm thickness
of EPS hard foam as a buffer layer, followed by sponge lining. Large protection area,
strong impact resistance. Two sets of sponge lining are provided, one thin and one
thick, in which the thick set is pre-installed on the helmet and the thin set is separately
installed. The liner is used for washing and replacement, and the polyester sponge is
suitable for replacement of different helmet groups.
Torsional lacing system has the following characteristics :1. No pressure point. Pressure
points are eliminated due to the unique lengthening of the drawstring guide and
precise closure. 2. Adjust the tightness at any time. The wearer can fine-tune the
tension immediately each time to the degree best suited to the BOA technology
available instead of traditional lacing. It is not possible to perform such adjustments
in use with normal tape. 3, reliable closure, will not loosen. If the strap stretches itself
throughout use, you can quickly turn the knob half way to tighten it again. No pressure
point, adjust the tightness at any time.
The holes in the guide rail are the same as in other Wendy helmets. You can choose
from original gray cover, MOE guide strip, quick-release headphone buckle, or Princeton
MPLS adapter.
The windscreen is locked with 5*12 hex socket screws and has a separate hole for
mounting the transparent goggle assembly.
EU2016/425 Standard
Helmet and Visor Only!
Manufacturer: FMA
Material: Fireproof ABS+EPS foam inner pad
Weight: 740g
Color: Black/gray/red/yellow/blue/orange/white
Content: Helmet + wool Velcro sticker (set)+ reflective sticker (set)+ inner pad cotton
(one set of each thickness)
Size: Recommended head circumference within 61CM
FMA SAR series helmet shell by fireproof ABS material, fireproof abs, strong liquidity
resistance, high processing, high strength, quality assurance, good product quality,
good service, welcome to call consultation, quality assurance, high impact strength,
chemical resistance, flame retardant material environmental protection. The inner
"eps" is polystyrene foam. This substance is based on polystyrene resin as raw material,
in the process of making the foaming agent as an auxiliary reagent, and then heated
at high temperature to form the plastic foam, this foam is a more unique rigid closed
-cell structure. Its chemical structure is relatively stable and it is a durable property."
The inner layer is the same as the common skateboard helmet with a 2cm thickness
of EPS hard foam as a buffer layer, followed by sponge lining. Large protection area,
strong impact resistance. Two sets of sponge lining are provided, one thin and one
thick, in which the thick set is pre-installed on the helmet and the thin set is separately
installed. The liner is used for washing and replacement, and the polyester sponge is
suitable for replacement of different helmet groups.
Torsional lacing system has the following characteristics :1. No pressure point. Pressure
points are eliminated due to the unique lengthening of the drawstring guide and
precise closure. 2. Adjust the tightness at any time. The wearer can fine-tune the
tension immediately each time to the degree best suited to the BOA technology
available instead of traditional lacing. It is not possible to perform such adjustments
in use with normal tape. 3, reliable closure, will not loosen. If the strap stretches itself
throughout use, you can quickly turn the knob half way to tighten it again. No pressure
point, adjust the tightness at any time.
The holes in the guide rail are the same as in other Wendy helmets. You can choose
from original gray cover, MOE guide strip, quick-release headphone buckle, or Princeton
MPLS adapter.
The windscreen is locked with 5*12 hex socket screws and has a separate hole for
mounting the transparent goggle assembly.
EU2016/425 Standard
Helmet and Visor Only!
English
French
